This is a step-by-step explanation of using Knoppix to save files on a Windows computer. It assumes you have the following: a Windows computer, a copy of Knoppix, and a USB flash drive (a.k.a. Key drive, Pen drive). Lets get started.
***********
-Insert Knoppix CD.
-Insert USB flash drive “UFD”.
-Reboot the computer.
-When you reach the Knoppix boot screen, press enter.
***********
If you don’t press enter Knoppix will automatically boot after a certain amount of time. Knoppix should begin to detect your computer’s hardware.
If Knoppix stops responding while trying to detect /dev/scd0 here is how to fix it. Restart the computer, but this time when you reach the Knoppix “boot:” prompt type “knoppix nodma”, then press enter.
Eventually you should be presented with a graphical interface. When it has finished loading it should look similar to a Windows desktop. On the left side of the desktop Knoppix displays information about the storage devices available on you computer. You might see things like “CD-ROM”, “Floppy disk”, “Hard Disk Partition [hda1]”, “Hard Disk Partition [sda1]”, depending on you exact configuration.
***********
-Open “Hard Disk Partition [hda1]” by single clicking on the icon, this should be you Windows partition.
***********
Everything on the Knoppix desktop is a single click, just like a hyperlink. If [hda1] is not your Windows partition, open each hard disk icon until you locate you files.
***********
-Open “Hard Disk Partition [sda1]” by single clicking on the icon, this should be your UFD.
***********
Knoppix mounts the UFD in “Read-Only” mode, that means you can look at the files on you UFD, but not add new files. We need to change the mode to “Read-Write” before we can get files onto the UFD.
***********
-Right click on “Hard Disk Partition [sda1]” > Actions > Change read/write mode.
-When asked if you are sure you really want to change the read/write mode Click “Yes”.
***********
That’s all there is to it! All you have to do now is copy the files from your Windows partition (My Documents, My Music, My Pictures, etc.) to your UFD.




No user commented in " Saving Windows using Linux "
Follow-up comment rss or Leave a TrackbackLeave A Reply